Page 177 - DAC_Catalog_2021-2022
P. 177

A
AUTO 67J Introduction to Automotive and Light Truck Diesel Systems
4 1/2 Units
AUTO 93E Diagnostic Techniques 1 1/2 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. One hour lecture, one and one-half hours laboratory (30 hours total per quarter). Diagnostic techniques for problem-solving in the automotive and light-duty truck powertrain.
AUTO 93F Automotive Transmission Service 6 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Operation of rear axles, transfer cases, clutches, automatic and standard transmissions, and transaxles. Diagnostic, inspection and repair procedures for these powertrain components.
AUTO 94A Principles of Four Stroke Cycle Gas 6 Units and Diesel Engines
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Shop operations specific to engine repair and rebuilding including safety and hazardous waste management. Emphasis on theory, diagnosis, disassembly, cleaning, inspection and failure analysis.
AUTO 94B Automotive Machining and 6 Units Engine Service
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter). Reconditioning cylinder heads and related valve train components including crack detection, repair, testing and assembly. Resurfacing cylinder heads.
AUTO 94C Automotive Machining and 6 Units Engine Service
Prerequisite: AUTO 94A.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter). Reconditioning engine short block assemblies and components including balancing, assembly and testing.
AUTO 94D Automotive Machining and 6 Units Engine Service
Prerequisite: AUTO 94A.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Precision and performance engine preparation with emphasis on improvements in volumetric efficiency. Includes selection and matching of components for maximum efficiency within mandated emissions requirements.
AUTO 94E Automotive Machining and 6 Units Engine Service
Prerequisite: AUTO 94C.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Complete automotive machine shop practice including engine repair, assembly, testing and installation. Researching service and installation procedures and parts and labor estimating.
AUTO 94F Automotive Machining and 6 Units Engine Service
Prerequisite: AUTO 94C.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Practice and skill development with emphasis on precision and productivity in rebuilding, servicing and installing engines. Research and prepare equipment operation and maintenance instructions.
AUTO 99A Automotive Electricity, Battery and 7 Units Cranking Systems
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, nine hours laboratory (156 hours total per quarter). Automotive electricity including the electron theory, fundamentals of circuit construction and interpretation, principles of magnetism as applied to electric motors, relays and coils. Diagnosis, troubleshooting and servicing of automotive battery and cranking systems including system repair procedures. Developing skills in the use of test equipment including the DVOM and electrical load testing tools for the analysis and diagnosis of these types of electrical systems.
All courses are for unit credit and apply to a De Anza associate degree unless otherwise noted.
(Formerly AUTO 64G.)
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A and AUTO 50B.
Four and one-half hours lecture (54 hours total per quarter).
As of January 2010, California state law required light duty diesel powered vehicles to be included in the smog check program. Diesel' higher efficiency is moving these vehicles' highway mileage to over 40 miles per gallon. Chevrolet and Jeep are all adding diesel powered vehicles into their new car line-up. This course will consist of lectures and laboratory demonstrations. Providing our students with the necessary skills to maintain and repair light duty diesel vehicles. Diesel training will give students new abilities that are required to be successful in their careers in the automotive industry.
AUTO 69Y Smog Check Update 1 1/2 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; current CA Smog Check License.
One and one-half hours lecture (18 hours total per quarter).
Legally mandated course by the California Bureau of Automotive Repair (BAR) to obtain a renewal Smog Check License every two years. This applies to all State Licensed Smog Check Technicians. The latest Smog Check Program changes and updates will be covered. The State Smog Check License renewal examination will be given at the end of the course.
AUTO 91A Automotive Brake Systems 6 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A and AUTO 50B.
Four hours lecture, six hours laboratory (120 hours total per quarter).
Repair, maintenance and troubleshooting of automotive braking systems.
AUTO 92A Automotive Steering and Suspension 6 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 51A and AUTO 51B.
Four hours lecture, six hours laboratory (120 hours total per quarter).
Repair, maintenance and troubleshooting of suspension and steering systems.
AUTO 92B Automotive Alignment 6 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Automotive alignment systems, including repair, maintenance and troubleshooting. Service and repair procedures.
AUTO 92C Automotive Electronic Chassis Controls 2 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. One and one-half hours lecture, one and one-half hours laboratory (36 hours total per quarter).
Computer controlled automotive suspension and steering systems, including repair, maintenance, troubleshooting, and service procedures.
AUTO 93A Automotive Final Drive Train 6 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter). Components of the final drive train including design features and service techniques.
AUTO 93B Standard Transaxles 2 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. One and one-half hours lecture, one and one-half hours laboratory (36 hours total per quarter).
Standard transaxles: power flow, service requirements and repair procedures.
AUTO 93C Automatic Transmissions 6 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Operation of automatic transmissions including torque converters, hydraulic control, planetary gear train, clutch and band operation. Inspection and repair procedures for automatic transmissions.
AUTO 93D Automatic Transaxles 2 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. One and one-half hours lecture, one and one-half hours laboratory (36 hours total per quarter).
A detailed study of automatic transaxles. Power flow, service requirements and repair procedures will be covered.
176
2O21-2O22 DE ANZA COLLEGE CATALOG

































   175   176   177   178   179